THE GATE PLACE

Gate Designs

Please select a category

Sizes refer to gap size.
Gap size is the measurement from the inner face of one pillar to the inner face of the other.

All gates have anti-theft levelling adjusters (Beaumont Excepted).
The use of adjusters allow awkward or sloping walls to be accommodated.

Wall railings are specially made to suit your requirements.
All wall railings are supplied with holes at each end. 2" feet can be supplied on ends and bottom at an extra charge.

All gates are finished in black primer. We advise 2 coats of good quality gloss paint upon installation. Gates can be galvanised at extra cost.

Posts are designed to be concreted in the ground 18" - 24".
Single and Bow Top gates have reversible opening.
Double gates have the latch on the right hand side.

NON - STANDARD SIZES
We are able to manufacture in non-standard sizes and would be pleased to quote on individual requirements.

PART	SIZE
BARS	10mm round 12mm for Tall Flat Top and split Bowtop (Not Regency Style)
SCROLLS	10 x 5mm
FRAMES	20 x 10mm 20 x 6mm From 25 x 25mm Structural hollow section